RamBody680
- New
-
22 t / 40 km/h
-
22.3 m³
-
102 kW (140 HP)
Towing device
A slim drawbar makes for a tight turning circle and, in turn, an ultra-compact vehicle. With a wide range of different hole patterns available, we can provide all tow hitches.
- Cushions jolts on poor roads for a smoother ride
- Designed with rubber silent blocks that have good inherent damping
- By simply switching over the locking pins, multiple trailer heights can be set (55 to 90 cm with standard tyres)
- The vehicle is equipped with a bottom hitch coupling, this results in much better handling and improved road safety
Small turning circle
The slim design of the drawbar makes for a very large steering angle and significantly reduces the turning circle. With the optional positive steering, the adjustable collision protection guard can be tailored to the tractor.
Chassis
For our chassis we use only rectangular tubing made of high-grade steel that is sealed all round; no cheap pressed steel or welded constructions. The large-volume rectangular tubing saves weight, is extremely torsion-resistant and has no open joints or cracks, making it easy to clean. Visually too, it makes a good, clean and neat impression.
Running gear 24 t parabolic suspension
Parabolic suspension with 24 t load-bearing capacity. With a widened spring centre to guarantee optimum stability. The spring packages are always fitted on the axles to provide large ground clearance.
Axles
BPW axles with automatic slack adjusters, axle cross-section 120 x 120 mm, track width 1.95 m, wheel brake 410 x 120 mm, 10-hole wheel end 10.0 t single axle load at 40 km/h
Lighting system
High-end 5-chamber rear lights with impact-resistant lens; all lights feature LEDs; secured by a stable light support located in the tailgate.
Push blade
The core of the push-off trailer is the push blade that is positioned on the synchronised push table. The sleek tunnel in the centre protects the dual-acting hydraulic cylinders from damage and integrated plastic slide rails bolster the sliding mechanism with use of minimal force. The push blade features a lattice design throughout, providing a perfect view of the cargo area. With the standard version, the top 40 cm can be folded down. The power supply via a scissor mechanism is simple and robust. A clean look rounds off the overall appearance.
Sturdy body construction
The folded outer posts ensure extreme body stability and provide a stylish appearance, while the sleek design increases the transport volume thanks to a particularly large cargo area.
Easy to adjust - seals
Adjustable seals that secure the push blade on all sides and guarantee a grain-proof construction for the push-off trailer.
Good visibility of the load
Thanks to the lattice design of the push blade, the driver always has a good view of the load.
Standard high-volume tailgate
More volume for the RamBody. The high-volume tailgate is supplied together with a hydraulically folding underride guard. During unloading, the underride guard is automatically folded so that none of the load is deposited on it.
Underride guard
The modular underride guard can be raised when navigating silo mounds and has been approved in accordance with the current EU Type Approval Regulation 2015/208. The screw-on structure can be replaced quickly and easily if it gets damaged.
Technical specifications
| Gross vehicle weight rating | 22 t / 40 km/h |
|---|---|
| Payload on site | approx. 20.0 t |
| Payload in Germany acc. to German Road Traffic Regulations | approx. 14.7 t |
| Empty weight | approx. 6.7 t |
| Permissible tongue load (max.) | 4.0 t |
| Spring-loaded drawbar | series |
| Trailer height | 55 / 70cm |
| Traction power requirement (min.) | 102 kW (140 HP) |
| Oil quantity for push unit | 21 l |
| Brake axles, carrying capacity at 40 km/h | each 10 t /13 t |
| Axle cross-section | 120 mm (150 mm) / 10 hole |
| Wheelbase | 1.55 m |
| Track width | 1.95 m (2.15 m) |
| Permissible tyre diameter (max.) | 1,500 mm |
| Suspension | 24 t |
| Unloading time per m³ of silage maize | approx. 25 Sec. at 100 l / Minute at 40 m |
| Max. unloading weight | approx. 22.0 t (highly load dependent) |
Dimensions
| Internal body dimensions | 6.63 x 2.37 x 1.50 m | |
|---|---|---|
| Transport volume without extension | 22.3 m³ | |
| Transport volume with 30 cm extension | 27.1 m³ | |
| Transport volume with 60 cm extension | 32.0 m³ | |
| Platform height unloaded with standard tyres |
p |
1.65 m 560/60 R 22.5 |
| Overall length |
L |
10.19 m |
| Overall height without extension |
f |
3.3 - 3.4 m |
| Overall height with 30 cm extension |
h |
3.5 - 3.9 m |
| Dimensions middle drawbar eye/middle rear trailer coupling |
m |
10.13 m |
| Underneath chassis tubes |
b |
min. 1.0 m |
Optional add ons
| 42.516 | "60 km/h version, tongue load of only 2 tonnes permitted, gross vehicle weight rating of 20 tonnes, like 40 km/h version but with rear fog light, no certificate of conformity, approval for specific use required |
| 13.312 | LED reversing light as separate working light, 2-core additional cable |
| 13.322 | LED reversing light as separate working light, mounted at the vehicle rear, 2-core additional cable |
| 42.608 | Running gear with air suspension, reinforces single-leaf pull rod with large air bellows, axle arresting cables, wheelbase 1.55 m (22-tonne gross vehicle weight rating) |
| 42.522 | For steering axle versions, screwed-on body mudguards are recommended for bodies with an outer width of 2.55 m or more |
| 16.490 | Manometer indicating the pressure of the running gear air bellows |
| 15.607 | BPW caster steering axle with shaft pressure disc, axle square 120 mm, wheel brake 410 x 120 mm, track 2.15 m, 10-hole wheel end, automatic brake slack adjustment, overhead brake cylinder. INFO: Delivered without lateral mudguards |
| 15.619 | BPW forced steering, axle square 120 mm, wheel brake 410 x 120 mm, track 2.15 m, 10-hole wheel end,overhead brake cylinder |
| 44.310 | Aluminium silage extension, 6.80 m long, 30 cm tall, mechanical folding front wall, not grain tight, volume increase + 4.8 m³ |
| 44.312 | Aluminium silage extension, 6.80 m long, 60 cm tall, hydraulic folding front wall, not grain tight, volume increase + 9.7 m³ |
| 44.320 | Manual folding down of the silage extension, on either the right or left side, via a cable winch INFO: The sidewall cannot be folded down if a tarpaulin is installed! |
| 44.020 | Harvesting plate, hydraulically height-adjustable (instead of the standard mechanical foldable one) |
| 23.926 | TwinTop cover, length up to 7.00 m, two-sided hydraulic folding net cover |
| 23.888 | Two hydraulic lines 12 mm to be mounted up to the lower edge of headboard, necessary for the actuation of the cover system hydraulic drive, compatible with the RamBody range |
| 7.007 | 40 km/h homologation according to EU type approval (VO)167-2013, delivery with COC |