Jump straight to the main content Jump straight to scrolling ticker

BigBody800S

Technology

Towing device

A slim drawbar makes for a tight turning circle and, in turn, an ultra-compact vehicle. With a wide range of different hole patterns available, we can provide all tow hitches.

  • Cushions jolts on poor roads for a smoother ride
  • Designed with rubber silent blocks that have good inherent damping
  • By simply switching over the locking pins, multiple trailer heights can be set (55 to 90 cm with standard tyres)
  • The vehicle is equipped with a bottom hitch coupling, this results in much better handling and improved road safety

Small turning circle

The slim design of the drawbar makes for a very large steering angle and significantly reduces the turning circle. With the optional positive steering, the adjustable collision protection guard can be tailored to the tractor.

Chassis

For our chassis we use only rectangular tubing made of high-grade steel that is sealed all round; no cheap pressed steel or welded constructions. The large-volume rectangular tubing saves weight, is extremely torsion-resistant and has no open joints or cracks, making it easy to clean. Visually too, it makes a good, clean and neat impression.

Running gear - 36 t parabolic suspension

Parabolic suspension with 36 t load-bearing capacity. With a widened spring centre to guarantee optimum stability. The spring packages are always fitted on the axles to provide large ground clearance.

Axles - Passive steering

BPW passive steering axles with automatic slack adjusters,

  • Axle cross-section 150 x 150 mm for both axles, track width 2.15 m
  • Wheel brake 410 x 180 mm, 10-hole
  • wheel end with shaft pressure disc for a smooth ride. The steering axle with a standard-fit raised brake cylinder offers superb ground clearance and the brake cylinder is kept out of the dirt area.

Tipping cylinder

Large telescopic cylinder, held with a gimbal ring  that absorbs all torsion from the cylinder during tipping

Image coming soon Placeholder

Two-way tipper design

Body tipper designed as two-way tipper. Side-tipping body tippers combine the robustness of a backwards tipper with the flexibility of a side tipper.

Due to the fixed welded centre post and the continuous top frame, the bodies are extremely stable and torsion-resistant. This frame design also creates the ideal configuration for attaching a hydraulically operated tailgate to ensure grain tightness and guarantee stability.

The two side panels are mounted using a pivot mechanism and can be opened from the bottom with a heavy-duty central locking mechanism. The side panels are totally smooth on the inside, allowing the load to slide out unimpeded. Due to the design with the central post and top frame, the side panels are integrated into a solid outer frame, a guarantee for long service life, distortion is practically impossible.

Two-way tippers are a very popular solution today. They can usually be tipped to the rear and to the left. The right-hand side is manufactured as a closed side panel, just like on standard body tippers. This substantially enhances torsional stiffness, particularly with very long bodies or with an uneven load. Cleaning is also easier as there are fewer moving components, joints and cracks.

Gimbal ring/Cylinder suspension

The telescopic cylinder is mounted in a gimbal ring. In this way, tension during the tipping process is prevented as the cylinder is extended. The upper ball socket of the telescopic cylinder is not secured with a simple snap ring, but with a very robust screw connection.

Belly strap

The belly strap transfers the forces produced during tipping from the underbody structure to the top frame. The belly strap is welded all-round, preventing an ingress of moisture. The side panels are manufactured from a single piece. Maximum stability is obtained thanks to the multiple folding of the metal sheets. The top frame is made from all-round sealed rectangular tubing 80 x 100 mm and neatly and robustly seals off the body. 

Lighting system

High-end 3-chamber rear lights with impact-resistant lens; all lights feature LEDs; secured by a stable light support with “pitched roof” to prevent the accumulation of dirt.

Hydraulic tailgate

A hydraulically operated tailgate with automatic closure and integrated cut-off valve is a must for any modern body tipper. A typical innovation from Krampe that many market competitors have now also adopted. A simple bit of kit that is extremely effective! The two locking hooks automatically open and release the tailgate when it is tilted. To close the tailgate, this process is done in reverse: the tailgate lowers, the locking hooks slide back into place and press the tailgate over the curved track and onto the trailer side. The hydraulic cylinders are retracted when the tailgate is closed on BigBody tippers. The side pivot bearings in the lift arm do not protrude above the upper edge of the top frame, but are flush with it instead. This eliminates the risk of them being damaged during loading.

Technical data

Permissible gross weight on public roads 31,000 kg / 34,000 kg at 40 km/h
Payload according to German StVZO approx. 21,400 kg / approx. 24,400 kg
Technically possible payload approx. 28,000 kg
Speed variants 40 km/h / 60 km/h
Drawbar sprung
Permissible vertical load 40 km/h 4,000 kg
Permissible vertical load 60 km/h 2,000 kg
Oil requirement 60 l
Stroke length 3,225 mm
Cylinder stages 5-stage
Drawbar height 55 – 70 cm
Axle manufacturer BPW
Axle cross-section 150 x 150 mm
Wheel bolts 10-bolt
Wheel bearings 13 t per axle at 40 km/h
Air brake system dual-line air brake system
Running gear parabolic suspension
Rear axle support hydraulic
Suspension load capacity 36 t
Platform height with reference tyres 1.67 m
Dumping height between ground and tipping pivot at max. tipping 1.30 m
Dumping height between ground and tipping pivot at 35° 1.40 m
Max. rear tipping angle 51°
Max. side tipping angle 35°
Required tractive force (min.) from 140 kW (190 hp)
Unladen weight from 9,700 kg
Cylinder diameter first stage 187 mm
Lifting force approx. 29 t for free-flowing materials
Brake size 410 x 180 mm
Track width 2.15 m
Brake force regulator ALB (load-dependent brake regulator)
Axle spacing 1.55 m / 1.81 m
Vehicle width 2.55 m / 3.00 m
Chassis – profile / dimensions / material rectangular tube / 400 x 200 mm / S355
Side wall thickness 4 mm
Floor plate thickness 4 mm
Overall height at 35° / max. tipping angle 7.20 m / 8.45 m
Overall height when side tipping 4.20 m
Overall length 9.93 m
Minimum number of control units 3
Reference tyres 600/55 R 26.5
Max. tyre diameter 1,380 mm / 1,510 mm
Body internal dimensions (L x W x H) 8.00 m x 2.32 m / 2.22 m x 1.52 m
Transport volume without extension 26.90 m³
Transport volume with 40 cm extension 33.90 m³
Transport volume with 60 cm extension 37.50 m³
Transport volume with 80 cm extension 41.00 m³
Transport volume with 80 cm + 20 cm extension 44.50 m³
For export trailers, higher payloads may be permitted in some cases under national homologation. The technical data are non-binding. We reserve the right to make design changes.

Downloads